FeaturedNew Design
CCT-Series
Ceramic Castellation Technology
mV Output
mV Output, Calibrated
CCT-4 Series
Advanced Sensors Ceramic Castellation Technology (CCT) 4 Series contains a piezo resistive sensor element that delivers a high level mV output in a low cost, small footprint, leadless castellation package The closed bridge sensor delivers a stable mV output in absolute and gauge pressures in both psi and inH20 ranges.
CCT-6 Series
Advanced Sensors Ceramic Castellation Technology (CCT) 6 Series contains a piezo resistive sensor element and additional thick film resistors to delivers a calibrated high level mV output in a low cost, small footprint, leadless castellation package. The overall accuracy is improved by laser trimming each sensor to minimize zero and span errors at room temperature.
Board Mount Sensors
AdVanced Sensors Board Mounted Pressure products are designed to the stringest requirementments for scientific and life science instrumentation. Their rugged construction is ideal for process and vacuum instrumentation as well. With mV, high level voltage, and digital output configuration an ideal solution is easily found.
CHT-Series
Ceramic Hybrid Technology
mV Output, Temperature Compensated, Constant Current
mV Output, Temperature Compensated, Constant Voltage
CHT-2 Series
Advanced Sensor Ceramic Hybrid Technology (CHT) 2 Series is a temperature compensated, mV output, PCB mounted pressure sensor packaged in a rugged Dual In Line package. The CHT-2 series is powered using a constant current and when configured as in the Application Note, the integrated gain set resistor will ensure sensor field interchangeability.
CHT-3 Series
Advanced Sensor Ceramic Hybrid Technology (CHT) 3 Series is a temperature compensated, mV output, PCB mounted pressure sensor packaged in a rugged Dual In Line package. The CHT-3 series is powered using a constant voltage and when configured as in the Application Note, the integrated current set resistor will ensure sensor field interchangeability.
CTO-Series
Ceramic Transistor Outline Technology
mV Output, Temperature Compensated, Constant Current
mV Output, Temperature Compensated, Constant Voltage
CTO-8 Series
Advanced Sensor Ceramic TO Technology (CTO) 8 Series is a temperature compensated, mV output, PCB mounted pressure sensor packaged in a rugged Transistor Outline 8 pin (TO-8) package. The CTO-8 Series uses a silicon MEMS pressure sensor mounted to a TO header with a separately soldered ceramic substrate that is uniquely laser trimmed and matched to each sensor. The CTO-8 series is powered with constant current and when configured as in the Application Note, the integrated gain set resistor will ensure sensor field interchangeability.
CTO-7 Series
Advanced Sensor Ceramic TO Technology (CTO) 7 Series is a temperature compensated, mV output, PCB mounted pressure sensor packaged in a rugged Transistor Outline 8 pin (TO-8) package. The CTO-7 Series uses a dual bossed low pressure silicon MEMS pressure sensor mounted to a TO header with a separately soldered ceramic substrate that is uniquely laser trimmed and matched to each sensor. The CTO-7 series is powered with constant current and when configured as in the Application Note, the integrated gain set resistor will ensure sensor field interchangeability.
IPVB-8000 Series
The IPVB 8000 Series incorporates a rugged silicon MEMS pressure sensor that is designed to measure gauge or absolute pressures in a rugged TO package with integrated vertical barb port. The sensor allows for simple pressure connection to plastic hosing with 3/32” ID tubing. The MEMS pressure sensor offers a linear mV output with high over range capabilities.
MCT- Series
Multi Chip Technology
Voltage Output & Digital Output
Mixed Signal ASIC Temperature Compensated Constant Voltage
Wide Selection of Port Styles
MCT-4A Series
Advanced Sensors Multi Chip Technology (MCT) 4A Series incorporates the latest mixed signal ASIC (Application Specific Integrated Circuit) with a bonded silicon gage to provide a high level analog output for medical, life science and pneumatic control industries. The designs superior performance provides 1% Total Error across a wide temperature range of -10 to 85°C.
MCT-4D Series
Advanced Sensors Multi Chip Technology (MCT) 4D Series incorporates the latest mixed signal ASIC with a bonded silicon gage to provide a leading Digital Output design for medical, life science and pneumatic control industries.. The MCT 4D Series provides a 14bit digital pressure and 11 bit digital temperature output in SPI and I2C protocols. The designs superior performance provides 1% Total Error across a wide temperature range of -10 to 85°C.
MCT-2A Series
Advanced Sensors Multi Chip Technology (MCT) 2A Series incorporates the latest mixed signal ASIC (Application Specific Integrated Circuit) with a low pressure bossed silicon MEMS sensor to provide a high level, temperature compensated transducer. Two electrical outputs ranges with bidirectional or unidirectional pressure types and 3/16in barb ports make it the ideal choice for HVAC or Air Flow measurement applications.
FRT-Series
Fiberglass Reinforced Technology
High Level Output, ASIC Temperature Compensated, Constant Voltage
Advanced Sensors Fiberglass Reinforced Technology (FRT) 1 Series is designed to measure barometric pressures within a small FR4 footprint. The sensor incorporates an application specific integrated circuit (ASIC) with a full analog path that ensures a wide dynamic output can be monitored at 15kHz in high speed train applications.
FRT-1 Series
MCT-24Bit -Series
24Bit Digital ASIC
High Resolution Digital Pressure
ASIC Temperature Compensated, Constant Voltage
MCT-D24HRD Series
Advanced Sensors Multi Chip Technology (MCT) 24DHRDprovides a 24bit digital pressure and 16 bit digital temperature output in SPI and I2C protocols. The advanced design requires no external calculation since a fully integrated digital signal processor (DSP) performs an error correction algorithm.
HVAC-Series
Application Specific--HVAC
Transmitter 4-20mA Output,
Wall Mounted
HVAC-211 Series
The HVAC-211 is a two wire 4-20mA transmitter idesigned to measure ultra low differential pressures in a wall mounted pack. With front side pressure ports and simple screw terminal for electrical connections this product is perfect for the HVAC professional..
MCT-SM9543D Series
Digital Pressure and Temperature Outputs
Ultra Low Pressure, SOIC Package
14Bit Digital ASIC Temperature Compensated, Constant Voltage, I2C & SPI Protocols
Advanced Sensors Multi Chip Technology (MCT) SM9543 Series incorporates the latest mixed signal ASIC (Application Specific Integrated Circuit) with a ultra low pressured RTV bonded silicon gage to provide a leading Digital Output design for medical, life science and pneumatic control industries in a small SOIC-16 package. The MCT-SM9543 Series provides a 14bit digital pressure and 11 bit digital temperature output in SPI and I2C protocols.
SM9543D Series
ASCX-Series
ASCX Footprint & Function
High Level Output, ASIC Temperature Compensated, Constant Voltage
Advanced Sensors Multi Chip Technology (MCT) 8 Series incorporates the latest mixed signal ASIC (Application Specific Integrated Circuit) along with a elastomeric silicon bonded MEMS sensor design to provide a high level analog output for medical, life science and pneumatic control industries. The updated design improves upon the ASCX traditional form factor and output with superior performance of across a wide temperature range of 0 to 60°C.
ASCX-MCT 8A Series
MCT-SM58A Series
High Level Output
ASIC Temperature Compensated, 3.3 & 5.0 Vdc Supply Voltage
AAdvanced Sensors Multi Chip Technology (MCT) SM58A Series incorporates the latest mixed signal ASIC . The designs superior performance provides 1% Total Error across a wide temperature range of -10 to 85°C. The ASIC’s advanced design allows for the sensor output to be limited for safety critical operations with internal error checking of the sensor’s input and output lines. With all the advanced features, the MCT-58A series is the ideal choice for OEM customers
SM58A Series
MCT-SM58D Series
Digital Pressure and Temperature Outputs
14Bit Digital ASIC Temperature Compensated, Constant Voltage, I2C & SPI Protocols
Advanced Sensors Multi Chip Technology (MCT) SM58D Series incorporates the latest mixed signal ASIC. The MCT SM58DD Series provides a 14bit digital pressure and 11 bit digital temperature output in SPI and I2C protocols. The designs superior performance provides 1% Total Error across a wide temperature range of -10 to 85°C while the ASIC’s advanced design sets safety critical operations at the forefront with internal error checking of the sensor’s input and output lines.
SM58D Series
MCT-SM5651 Series
mV Compensated, Sub PSI Ranges
Constant Current Excitation, High mV Output
Temperature Compensated, Gain Set Interchangeability
Advanced Sensor Ceramic Hybrid Technology (CHT) Series is a temperature compensated, mV output, PCB mounted pressure sensor packaged in a rugged Dual In Line package. he CHT-SM5651 series is powered using a constant current and when configured as in the Application Note, the integrated gain set resistor will ensure 2% field interchangeability. The CHT-SM5651 series superior die performance coupled with rugged ceramic substrate ensures long term stability with superior temperature performance over a wide operating range.
SM5651 Series
MCT-SM5652 Series
mV Compensated, Sub PSI Ranges
Constant Voltage Excitation, Normalized 25mV Output, Temperature Compensated
Advanced Sensor Ceramic Hybrid Technology (CHT) 2 Series is a temperature compensated, mV output, PCB mounted pressure sensor packaged in a rugged Dual In Line package. The CHT-SM5652 series is powered using a constant voltage with a high level 25mV output. The CHT-SM5652 series superior die performance coupled with rugged ceramic substrate ensures long term stability with superior temperature performance over a wide operating range.