top of page
Anchor 1-Board Mount
CTO-8 Series

CTO-8 Series

(CTO) Ceramic Transistor Outline Technology

mV Compensated, TO-8 Package PSI Ranges, Constant Current Sensor


- TO-8 Transistor Outline Package

- Pressure Ranges ( 2 to 150 PSI)

- Constant Current

- 1% Interchangeability

- Temperature Compensated

- Top, Bottom, Dual Tube Configurations

- 0.1% High Accuracy

- Wide Pressure Range

Great for .....

Pneumatic Controls

Pressure Scanners

Medical Optical Surgery

About the CTO-8

Advanced Sensor Ceramic TO Technology (CTO) 8 Series is a temperature compensated, mV output, PCB mounted pressure sensor packaged in a rugged Transistor Outline 8 pin (TO-8) package. The CTO-8 Series uses a silicon MEMS pressure sensor mounted to a TO header with a separately soldered ceramic substrate that is uniquely laser trimmed and matched to each sensor. Available in gage, absolute and differential pressures and four different package configurations allow OEMs to optimize their board design. The CTO-8 series is powered with constant current and when configured as in the Application Note, the integrated gain set resistor will ensure sensor field interchangeability. Altogether, the CTO-8 series superior die performance, coupled with rugged ceramic substrate ensures long term stability with superior temperature performance over a wide operating range.




±0.10 %FSS

Stability (1 Yr)

±0.40 %FSS

Hysteresis & Repeatabillity

±0.05 %FSS (Typical)

Response Time

< 100 uS


Operating Temperature

-40 to 125 ̊C

Compensated Temperature

0 to 50 ̊C

Thermal Error, Offset

-0.5 to 0.5 %FSS

Thermal Error, Span

-0.5 to 0.5 %FSS



75-150 mV Full Scale Span (%FSS)


0.5 to 2.0 mA


-2 to 2 mV

Bridge Resistance

2500 to 6100 Ω

Maximium Ratings


3 mA

Storage Temperature

-50 to 150 ̊C

Over Pressure

3x Range

Media Comptabilty

Non Corrosive Gases

Model Number Configuration

Mechanical Dimensions


Contact Our Sales Team

Have questions? Need a quote? We are ready to help as a member of our sales team will contact you to discuss your requirements. 

bottom of page