MCT-LL 4D Series
(MCT- LL) Multi Chip Technology, Liquid Level
MCT-Liquid Level LL 4D Digital Output, 1% TEB High Accuracy
Features
- Unique Two Piece Port Design
- Dual In Line (DIP) Package
- Advanced Silicone Elastomers for Superior Isolation
- 1.0% Total Error Band (TEB)
-Digital Output
- Digital Temperature & Pressure Sensor
- I2C or SPI Digital Protocols
- 14bit Resolution
Great for .....
Liquid Density Measurements
Vessel Height Measurement
Corrosive Liquid Height
About the MCT-LL 4D
Advanced Sensors Multi Chip Technology Liquid Level (MCT-LL) Digital Output Series utilizes a unique two-piece pressure port design and advanced Dimethyl Silicone elastomer that ensures the highest level of isolation of the sensor and electronics from the liquid media. With AVSensors advanced mixed signal ASIC (Application Specific Integrated Circuit) and RTV bonded silicon MEMS gage sensor a14bit digital pressure and 11 bit digital temperature output in SPI and I2C protocols for measuring liquids in open and closed containers can easily be measured. The designs superior performance provides 1% Total Error across a wide temperature range of 0 to 85°C. With all the advanced features, the MCT-4LL D series is the ideal choice for measuring container height for many applications.
SPECIFICATIONS
Performance
Total Error Band
±1.0 %FSS
Resolutions
14 bit (0 to 16383)
Update Time
2Khz
Calibration
2nd Order Offset or Sensitivity
Thermal
Accuracy
-40 to 125 ̊C
Compensated Temperature
-10 to 85 ̊C
Thermal Error, Offset
±0.4 %FSS (Typical)
Thermal Error, Span
± 0.2 %FSS
Electrical
Output
Digital Output, 14 bits, 0 to 16384 cts
Protocols
I2C or SPI
Offset
10% or 5% Cts (16384)
Full Scale Span
80% or 90% Cts (16384)
Maximum Ratings
Excitation
5.5Vdc
Storage Temperature
-50 to 150C
Over Pressure
5x Range
Media Comptabilty
Non Corrosive Liquids
Model Number Configuration
Mechanical Dimensions
Contact Our Sales Team
Have questions? Need a quote? We are ready to help! Select "Contact" from the Main Menu and a member of our sales team will contact you to discuss your requirements.